作為軍事模型的
大型坦克模型在進行了一段時間的使用之后需要進行相應的保養，否則無法保證其質量，很有可能在出售的時候存在問題，下面來詳細講解一番吧。
The large tank model, as a military model, needs to be maintained after it has been used for a period of time. Otherwise, its quality cannot be guaranteed. It is likely to have problems when it is sold. Let's explain it in detail.
1、保存位置
1. Save location
禁止懸掛放置：放置在兒童不易接觸的地方，防止兒童不慎從車模上摔下來。不僅坦克模型損壞，更容易傷害兒童。
Prohibit hanging and placing: place it in a place where children are not easy to touch to prevent children from falling off the vehicle model accidentally. Not only the tank model is damaged, but also children are more likely to be injured.
無高溫曝曬：不要長時間暴露在陽光直射或高空燈下，容易造成涂漆車輪和塑料件的老化、變形和起皺，橡膠輪胎容易氧化并產生熱溶解。
No high temperature exposure: Do not expose to direct sunlight or overhead lights for a long time, which is easy to cause aging, deformation and wrinkling of painted wheels and plastic parts, and rubber tires are easy to oxidize and produce heat dissolution.
避免潮濕環境：如果坦克模型長時間放置在潮濕的地方，車身的合金會容易氧化、黑斑、油漆起泡等現象，因此盡量保持放置環境干燥。
Avoid wet environment: if the tank model is placed in a wet place for a long time, the alloy of the car body will be prone to oxidation, black spots, paint bubbles and other phenomena, so try to keep the storage environment dry.
輪胎懸掛位置：不同坦克模型廠家生產的坦克模型重量不同。
Tyre suspension position: tank models produced by different tank model manufacturers have different weights.
離開包裝箱：這不僅影響坦克模型的觀賞度，還直接影響坦克模型的收藏價值和轉售價格。
Leaving the packing box: this not only affects the viewing degree of the tank model, but also directly affects the collection value and resale price of the tank model.
2、欣賞和玩耍
2. Appreciation and play
不要用太大的力：高仿真的坦克模型是由許多零件組裝而成的，有些零件非常小，所以一定要防止墜落、防震和受壓。我們做這件事時要小心，不要用太大的力氣。零件損壞
Don't use too much force: the highly simulated tank model is composed of many parts, some of which are very small, so we must prevent falling, shock and pressure. We should be careful not to use too much force when doing this. Parts damaged
專門開門器：如果目前找不到專門的開門器，可以用明信片或具有一定硬度的塑料片來代替。因為長期用手打開車門會對車身油漆造成很大的損壞，甚至可能損壞車門。
Special door opener: If no special door opener can be found at present, it can be replaced by postcards or plastic sheets with certain hardness. Because opening the door by hand for a long time will cause great damage to the body paint, and may even damage the door.
3、維護
3. Maintenance
除塵：定期用軟刷、吹風機等工具擦拭坦克模型表面的灰塵。
Dust removal: regularly wipe the dust on the surface of the tank model with soft brush, hair dryer and other tools.
油漆打蠟：合金坦克模型一般需要用車蠟或碧珠擦拭洗車面進行防銹處理兩到三個月后。但要注意的是，每一次打蠟都要薄、均勻、少。如果蠟太多，很容易嵌入到坦克模型的縫隙中。
Paint waxing: alloy tank models generally need to be cleaned with car wax or green beads for rust prevention treatment after two to three months. However, it should be noted that each wax should be thin, uniform and less. If there is too much wax, it can easily be embedded into the gap of the tank model.
以上就是三個方面分析大型坦克模型的養護相關內容了，這樣愛惜坦克模型，會使坦克模型的壽命延長。更多相關事項就來我們網站
http://maov.com.cn咨詢吧！
The above three aspects analyze the maintenance of large tank models. This will prolong the life of tank models. Come to our website for more relevant matters http://maov.com.cn Ask!
