在制作軍事模型之前，需要注意哪些細節呢？以便在制作模型時少走彎路。今天大型軍事模型廠家要和大家分享的是--制作軍事模型視覺色彩需要注意的細節！

Before making the military model, what details should be paid attention to? In order to avoid detours when making the model. What large military model manufacturers want to share with you today is the details that should be paid attention to when making visual colors of military models!

模型的配色依據大多來自產品的預期效果圖，往往有意識地強調某種色調在和諧中追求對比。為了使產品模型更接近實際狀態，在完成模型的組裝、拋光和噴漆后，有必要通過一定的視覺手段實現更真實、更清晰，有利于展示。

The color matching of the model is mostly based on the expected effect picture of the product, and it is often conscious to emphasize that a certain tone pursues contrast in harmony. In order to make the product model closer to the actual state, it is necessary to achieve a more realistic and clear display through certain visual means after the completion of model assembly, polishing and painting.

模型的視覺表達主要是產品標志、商標、功能系統標志，有的甚至整個企業形象。除了推廣產品，把用戶的利益放在一位也是產品視覺傳達的根本目的。

The visual expression of the model is mainly product logo, trademark, functional system logo, and some even the entire enterprise image. In addition to promoting products, putting the interests of users first is also the fundamental purpose of product visual communication.

在設計方案中確定所需的文字標記部分。如果不確定，可以先將標記內容轉印到模型的適當位置。一般產品模型使用的材料不是長久性的，容易損壞。為了防止有保存價值的模型損壞，應采取相應的保存方法。

Determine the required text mark part in the design scheme. If you are not sure, you can first transfer the marked content to the appropriate location of the model. The materials used in general product models are not durable and easy to damage. In order to prevent the model with preservation value from being damaged, corresponding preservation methods should be adopted.

無論如何保存，都要注意防潮、防曬、防高溫、防擠壓，以免變形褪色。制作軍事模型的常用方法是用透明度高的塑料片組裝成透明罩，蓋在模型上；或者直接放在透明的玻璃窗里，既能防止損壞和灰塵落下，又能隨時供人們觀看和研究。

No matter how it is stored, attention should be paid to moisture-proof, sunscreen, high temperature and extrusion to avoid deformation and fading. The common method for making military models is to use plastic sheets with high transparency to assemble a transparent cover and cover the model; Or it can be directly placed in the transparent glass window, which can not only prevent damage and dust from falling, but also be available for people to watch and study at any time.

此外建立光線是拍好產品模型的關鍵.從產品與環境的關系入手，用紙或布做成主色調的背景。拍攝時好不要直接使用閃光燈，因?yàn)殚W光燈的射向與相機的拍攝角度一致，很難從正面顯示產品本身的體積關系和光影變化，造成平淡、模糊、無表現力的效果。

In addition, establishing light is the key to shooting a good product model. First, start with the relationship between the product and the environment, and use paper or cloth to make the background of the main color. It is better not to use flash directly when shooting, because the flash's shooting direction is consistent with the camera's shooting angle, it is difficult to display the volume relationship and light and shadow changes of the product itself from the front, resulting in flat, fuzzy and non expressive effects.

所以要把光源和拍攝方向考慮成一定的角度，一般采用夾角45.左右。并可根據產品的各個形態特征和功能區域適當調整光角，使產品的結構形態和線形在光影的作用下得到充分體現。

Therefore, the light source and the shooting direction should be considered at a certain angle, generally about 45. In addition, the light angle can be adjusted appropriately according to each shape feature and functional area of the product, so that the structural shape and linear shape of the product can be fully reflected under the effect of light and shadow.

制作軍事模型視覺色彩需要注意的細節這一問題就講解到這里了，您對此有什么方面的內容要了解，就來我們網站http://maov.com.cn的進行咨詢吧！

This is the end of the details that should be paid attention to when making the visual color of the military model. If you have any information about this, please come to our website http://maov.com.cn Let's consult!